Phay
Công Cụ Phay YG-1
Công cụ phay YG-1 được công nhận là một trong những công cụ cắt hiệu quả nhất trên thế giới,
đáp ứng nhiều người dùng bằng cách gia tăng sản lượng hàng loạt.
ản phẩm cũng được biết đến nhờ hiệu suất vượt trội với hàng loạt các chủng loại,
bao gồm một loạt các nguyên vật liệu và vô số các ứng dụng.

- Ultra dense PVD coating with optimal thermal resistance & added strength for general purpose.


- For High Hardened Steel(up to HRc70), Mirror Finish
- Superior tool life compared with carbide E/M
- Excellent heat resistance
-
2 Flute Corner Radius
-
2 Flute
Ball

- YG-1’s special technology coating
- For High Hardened, Pre-Hardened Steels, Stainless Steels, Aluminum, and Graphite
- Ball, Corner Radius, Full Radius(220˚), High Feed
-
For stainless steels (XMB130A) 1 Tooth Over Type (Big Chip pocket)
-
For Graphite / Diamond Coated (XMB110D, XMR110D) High Rake Angle (Sharp Cutting Edge)
-
For High Hardened Steels (XMB260T, XMR260T) Helical(Ball), Straight(C/R) Gash(Negative Rake)
-
Full Radius (XMM110V) Precise Copy milling (Straight Gash)
-
High Feed Insert (XMF110V)

- YG-1’s “Y” technology coating
- Pre-Hardened Steel (~HRc45), Carbon Steels, Alloy Steels, Cast iron
- Modular type tools can decrease manufacturing cost due to changing modular part only, and can increase stock removal rate than insert tip type tools
-
2 Flute Ball
-
4Flute Corner Radius
-
6Flute Square & Corner Radius

- For High Hardened Steel(HRc50~70)
- High Speed Machining, Dry Cutting
- YG-1’s silicon based technology coating
-
X5070 General
-
Ball for Rib
2 Flute -
2,3,4 Flute
Ball -
2 Flute Miniature Corner Radius
-
2 & 4 Flute Corner Radius
-
6 Flute 45˚
Helix -
2 Flute Corner Radius for Rib
-
High Feed
-
4 Flute 0˚
Helix

- YG-1’s “Y” technology coating
- High speed Machining for Pre-Hardened Steel up to HRc55
- Unique flute design for excellent chip evacuation and vibration reduction.
- Optimal roughing tooth profile to reduce cutting forces.
- Special tool geometry for high feed rate and heavy cutting.
- Strong end tooth design for plunge and pocket milling.
- Custom engineered coating to allow long tool life and excellent chip evacuation.
-
2 Flute Ball
-
2, 4 Flute 30˚ Helix Square
End Mill -
6 Flute 45˚ Helix Square End Mill
-
2, 4 Flute 30˚ Helix Corner Radius
-
4, 5 Flute Multiple Helix Corner Radius

- Mold & Die for Pre-Hardened Steels up to HRc55
- Dry & Wet Cutting with high speed machining
- Excellent for high precision finishing
-
2,4 Flute Ball
-
2 Flute Ball for Rib
-
2,4 Flute Corner Radius
-
2 Flute Corner Radius for Rib
-
2, 4 Flute
-
2 Flute for Rib
-
3 Flute 38 ° Helix Short Length
-
6 & 8 Flute 45° Helix
-
Multi Flute 20° Helix Long Length Roughing-Fine

- YG-1’s “Y” technology coating
- For Stainless Steels, Titanium, Super Alloys, and Steels
- High speed machining for Titanium, Inconel, and Stainless Steels
-
4 Flute Corner Radius with Double Core
-
5 Flute Corner Radius
-
5 Flute 40˚ Helix Rougher (Only Europe)

- Excellent performance for machining low hardness steels to medium hardness steels and tough materials.
- High helix and deep flute can help to cut very low thermal conductivity materials like Titanium, nickel based alloys and cobalt alloys
-
2, 4 Flute End Mill
-
3&4 Flute 50˚ Helix End Mill
-
6&8 Flute 45˚ Helix End Mill
-
Multi Flute Roughing

- YG-1’s “Y” technology coating
- Steel, Cast Iron, Stainless Steel
- Heavy Cutting
-
4Flute Multiple Helix Ball
-
4Flute Multiple Helix (Square, Corner Radius)
-
6Flute Multiple Helix (Square, Corner Radius)

- 3 Flute
- Square End & Corner Radius
- Standard and Extended Length
- Coated and Uncoated
-
3 Flue Helix Corner Radius
-
3 Flue Helix Square

- Bright and TiCN Coated
- For Aluminum Alloys
- Mirror surface – Excellent surface Finishes
-
1 Fl. End Mill
-
2, 3 Flute Ball
-
2, 3Flute 45˚ Helix
-
3Flute Roughing

- YG-1’s Diamond technology coating
- High performance on graphite and composite materials including CFRP, GFRP
- Excellent surface finish due to high speed
-
For Graphite
-
2 Fl. Ball Nose (with Neck/ Taper Neck)
-
2Fl. Square & Corner Radius End Mill
-
3Fl. 40˚ Helix Corner Radius End Mill
-
4Fl. Corner Radius End Mill
-
For CFRP
-
Multi Flute Dual Helix
-
4 Flute 15˚ Helix

- For composite Materials – CFRP, GFRP
- Reduce delamination and burrs
- Excellent abrasion resistance due to Diamond Coating
-
ROUTER

- YG-1’s “Y” technology coating
- Replace Coated Solid Carbide End Mill with same Cutting Conditions
- Better Performance than Coated Solid Carbide End Mills for Both CNC machining center & Conventional machine due to the excellent Toughness
-
2 Flute 30˚ Helix Ball
-
2, 3, 4Flute 30˚ Helix
-
4Flute Multiple Helix
-
Multi Flute Roughing

- Optimal chip formation and evacuation
- For Titanium and Titanium Alloys
- Heavy Cutting
- Variable face profile & sinusoidal(wave) cutting edges
-
Multi Flute Dual Helix